After a service, you should be able to answer three questions: what was checked, what was done and what remains outstanding. A signed sheet saying only “all correct” offers little help when the behaviour of your home changes months later. The report should preserve the context of the visit without requiring another phone call to reconstruct it.
Start with the system and the visit
Check the address, date and equipment listed. The outdoor unit, indoor module and hot-water cylinder may have different references. If there is underfloor heating, establish which associated components were included in the service. A photograph of the identification plate and a clear equipment reference help avoid attributing an observation to the wrong machine.
The reason for the visit matters too: scheduled maintenance, investigation of a fault or follow-up after earlier work. These are different activities. If you reported an intermittent noise, the document should explain whether it occurred during the appointment or still needs observing under different conditions.
Readings need units and context
A temperature without a measuring location is ambiguous. Ask whether it refers to flow water, return water, the cylinder or the room. Similarly, a water-circuit pressure should be distinguished from a refrigerant-circuit reading. Daikin’s service guide describes checks covering hydraulics, electrical controls, the outdoor unit and the refrigerant circuit; their precise application depends on the equipment.
When comparing two visits, it helps to record whether the system was heating, cooling or producing hot water, and whether operation had stabilised. A reading taken during start-up is not necessarily comparable with one recorded during established operation. A figure found online or in a neighbour’s report is not automatically the target for your installation.
Separate findings, completed work and recommendations
Read the report in three parts. “Dirt observed” describes a condition; “included component cleaned” records completed work; “replacement recommended” proposes a future action. The final statement does not mean that the part has already been changed or that its cost is included.
- Condition found and the issue reported by the user.
- Checks performed and anything that could not be inspected, with the reason.
- Work completed and changes to settings that need explaining.
- Outcome of the final functional check.
- Outstanding items, priority and whether a quotation or further appointment is needed.
Not every field needs a number. Where a check does not apply to the equipment, stating this is clearer than entering zero. An inaccessible area should also be distinguished from an area inspected without finding an issue.
Compare trends without diagnosing the system yourself
Keep reports alongside notes about how the home is used. If consumption changes, include dates, occupancy and schedules: the bill total alone cannot establish performance. Our guide to increased heat pump energy use helps you prepare that information.
A report records observations on a particular date. It is not continuous monitoring or a guarantee against later faults. It does not authorise the user to remove covers, change installer settings or work on electrical and refrigerant circuits.
Finish with a clear next step
Before filing the report, establish who must approve any outstanding work and when it should be reviewed. A proposed service date is different from a confirmed appointment. The installation history should distinguish these and retain the documentation available for each unit.
Red Málaga’s maintenance plans include the agreed preventive visits, recorded measurements and reports. Fault assistance is reserved for active contract customers and is quoted separately. If a report recommends a repair, ask for its scope and price before approving it; preventive maintenance fees do not automatically include replacement parts or repairs.