A simple routine with a clear boundary
Observing the installation helps you recognise changes and report problems. It is not the same as carrying out a professional inspection. A practical rule is to stay with user controls and visible, accessible areas, following the specific manual. If a check requires tools, removing covers or reaching a dangerous area, leave it for a technician to assess.
Before starting, identify the components in your installation. Looking after a home with underfloor heating is not identical to looking after one with fan coils. Having a heat pump does not mean all components, filters or controls are the same.
Check what the controller is requesting
Read the active mode, schedule and requested temperature. Check the date and time if operation does not match the expected programme. A screenshot of the normal display provides a reference for future enquiries. You do not need to enter protected menus to obtain these details.
Distinguish the temperature you request from the one the controller measures. If you do not know what a number represents, look for its explanation in the manual. Do not change a control curve or installer parameter believing it to be the room thermostat.
Look around the outdoor unit
From a safe position, look for objects, bags or vegetation encroaching on the ventilation space. Keep the surroundings clear while respecting the distances specified for the model. Do not use the unit as a shelf or add a protective cover without checking its suitability.
Picking up objects from nearby ground is different from putting a hand through a grille. Do not touch the fan or fins, and do not use a pressure hose on the unit. If dirt is stuck to the equipment or an object is trapped inside, report it so appropriate cleaning can be assessed.
Check what is visible inside the home
Check whether furniture or curtains obstruct emitters' air inlets and outlets. Look for a thermostat that has become hidden behind an object. Note damp marks, dripping or a new noise without dismantling the affected components.
For some fan coils, the manufacturer allows users to clean the filters. Do this only where the manual identifies the filter, access and safe procedure for that model. If technical panels need removing or you cannot identify the component, ask for help. Air filters and components in the water circuit are not maintained in the same way.
Record readings without changing them blindly
If the controller or an accessible gauge shows pressure, note the reading alongside the equipment's operating state and the date. Do not use a value found on another website as a universal target. Interpretation depends on the installation's instructions and its assessment.
Repeated pressure loss is not resolved by continually topping up on your own initiative. Nor should you bleed the system, open valves or add products without specific instructions. The purpose of the record is to show how things change, not to make you responsible for work without the information needed to carry it out.
Turn your observations into a useful enquiry
Keep a short note of the date, warning, affected service and any changes in use. If everything is working, retain only relevant observations; you do not need to watch the display constantly. Professional inspection frequency is agreed according to the system and applicable instructions.
When you notice something unusual, share the model and the specific observation. At Red Málaga, we can assess the enquiry and define the appropriate service. These checks at home help explain the situation, but do not certify that an installation is in good condition or replace agreed maintenance tasks.
More common questions
Can I clean any filter I find?
No. Only those identified in the model's manual as accessible and maintainable by the user. Hydraulic filters, internal components and parts requiring dismantling should be assessed as part of professional maintenance.
Sources and technical reading
Some source documents are available in Spanish.